Save on Audio and Video Equipment

Works with any Harmony Remote for one-touch control of DVD's, Blu-Ray Disc movies and more on PS3. Supports all 51 PS3 commands to allow you to control XrossMediaBar (XMB), DVD and Blu-Ray Disc movies and all other console functions, including power on and off. Bluetooth wireless link keeps valuable PS3 ports available for other controllers. Simple guided online set-up walks you through the process of configuring the remote for your PS3. Always-On AC power. The adapter is always ready for input. When you press a button on your remote, your PS3 responds right away.

All that needs to be done is just install the Remote Range Xtenderât have to attach anything to the front of your remote or be limited to using your remote in only one room. The Remote Range Xtender

Does your entertainment system have wooden doors or would you like to mount your components in a closet? Without a clear line of sight infrared (IR) signals from a remote control will not reach the equipment. We have the answer. Our Remote Control Repeater Kit contains all equipment necessary to remotely operate 4 components (expandable to 12 components) using your standard remotes. Mount the IR receiver in a central location and connect to the IR Distribution Block. This block repeats the signals through emitters to your electronic components. Your components may now be mounted in your entertainment center, closet or another room! The kit is self-contained and easy to connect. With this kit you may mount a receiver in a convenient place on or near your entertainment system. The receiver has a 9 foot cable that is then attached to the repeater system that is mounted in your entertainment cabinet. The kit includes 4 emitters. These emitters are connected from the repeater system and placed over the IR receiver of the equipment. Simple installation and hook up while using your existing remotes.

Gain complete control of components that are hidden behind cabinets or walls. With a range of up to 100 feet, you can place your equipment out of sight, or even move it to the next room. Designed for use with the Logitech® Harmony® 1000 or 890 Advanced Universal Remotes, Z-Wave (RF) Technology enables remote control of audio, visual, lighting, climate, and security systems without direct line-of-sight. Use additional receivers to control multiple entertainment systems.

Hot Link Pro completes your home theater system with a super slim-line infrared eye!The Hot Link patented system constantly monitors the ambient light and noise floor. In darker ambient light it becomes more sensitive to remote control pulses, making the eye the most sensitive it can be based on ambient light environment. When the eye is in a "hidden" location behind a speaker grill, tucked up in a toe-kick or in a door slot it compensates for the expected loss in distance by becoming more sensitive to the pulses emitted from remote controls. Get great remote control roaming freedom, and enhanced beauty of your home theater.

Imagine having your A/V components (your satellite receiver, DVR, DVD player or a camcorder) in one room and the ability to watch them in another room, even multiple rooms, without running wires. Or being able to listen to your computer's MP3 collection on a pair of powered speakers in another room? Terk's Leapfrog LF-30S is a wireless transmitter/receiver system that does just that. It also gives you the ability to control the A/V source from the other room, so you can actually change the channels on your satellite receiver from the second TV's location. The Leapfrog LF-30S is a wireless transmitter/receiver system that eliminates the need or expense of running extra wires from room to room. It gives you the power to control the video source from the second TV's location using your remote control. By transmitting across the 2.4 GHz frequency band it gives you the clearest signal -with up to a 150ft range. Its' signals penetrates walls, doors, ceilings and floors without any interference. Multiple channel selection allows you to select from four different channels to ensure that you're receiving the best signal possible. The LF-30S is easy to install requiring no tools. A built-in modulator ensures easy connection to any TV, either new or old. The LF-30S system is even expandable. With the purchase of additional receivers, you can use it with multiple TVs throughout your home.

Leapfrog's LF-IRX remote control extender converts the infrared signal from a standard remote control into a long-range RF radio signal, allowing components to be controlled from virtually anywhere in the home without the need for additional equipment or wiring. Remote control extenders use the 418 MHz frequency band to command components through any obstacle, including walls and floors. The product is ready to use in seconds, simply by placing the LF-IRX's extension unit in the appropriate room. LF-IRX control extender comes with all the required equipment, including batteries. Just take it out of the box, set it up, and enjoy your components from wherever you choose.LF-IRX can control virtually any household device that is operated via infrared remote control, including satellite receivers, personal video recorders, VCR's, CD players, stereo receivers, tape decks, etc.

<br><b>Works with the new PS3 Slim!<br><br> The most affordable wireless infrared (IR) adapter for the PS3 has more features than other adapters that cost almost twice as much. Most importantly, its firmware can be upgraded, so a PS3 firmware upgrade wont leave with an expensive paper weight. <br><br> This device will easily make your PS3 compatible with all IR universal remote controls. <br><br> Features:

- Supports all 51 PS3 commands, and an additional Discrete Off macro that will power off the PS3 from any scenario (game, movie, XMB) with a single IR command. No need to stand there holding the remote while the PS3 powers off.

- Upgrading the firmware is easy with our new utility tool. There are no drivers to install and the application is a single executable file. The device is shipped with the latest firmware version already installed.

- Externally powered via any powered USB port using a standard USB cable (included). A powered USB port is available on most DVR units. Otherwise, any standard USB charger may be used instead, as long as it provides 5 Volts. When properly powered, the status LED (inside the Schmartz light bulb) will be lit solid. The LED blinks with each IR command received.

- Does not need to be located with the PS3. It just needs to be within 30 feet of the PS3.

- External IR code input compatible with all IR and RF repeaters. All you need is a cable with 3.5 mm mono plugs at each end (not included), connected to the PS3IR-500 (IR input) and the repeater.

- A 5 ft USB cable for powering the device is included in the kit. <br><br> - FCC and Industry Canada certified, and complies with European Union CE standards.

This remote is designed to work with the model 625 receivers, but will work with virtually every model of Dish Network Receiver. Please contact Dish Network if you are unsure of which remote to purchase for your receiver model.

We've created one of the most convenient and useful products for the iPod (including the new 5th Gen) and iPhone (including the 3GS) that you have been looking for: The iPod and iPhone Dock Extender - the iExtend in BLACK! Just plug it in and extend your dock....its so simple and about time!! Tired of constantly removing your iPod or iPhone from its case to use your docking station or iPod or iPhone speaker system? Does attaching dock-mounted accessories like your iPod remote seem impossible? Thanks to the iExtend iPod and iPhone dock extender, that's all a thing of the past! So useful: No matter what case you own, iExtend iPod and iPhone Dock Extender has been designed to fit it. Your iExtend Dock Extender uses the same compact iPod or iPhone plug as found on the standard docking cable from Apple, so it's compatible with all cases that have a dock connector opening. All 30 pins are passed through, so any other iPod feature works too, of course! Tired of stripping down your iPod or iPhone to dock it? Have a Nano or other Apple product with the audio jack on the bottom and all of those other fun devices cover up the audio because it is so close to the 30-pin connector? Not anymore....just extend it....iExtend my iPod and iPhone....you should too!